Avg Total Cost
$211k
2026 estimate
Cost Per Sq Ft
$109
Standard finish
Cost Range
$180k–$264k
low to high
City Index
0.97x
vs state avg
How Much Does It Cost to Build a House in Conway in 2026?
Building a home in Conway, South Carolina in 2026 typically costs between $179,741 and $264,325, with most projects landing around $211,460 for a standard 2,000 square foot home. At $109 per square foot, Conway is below the South Carolina state average of $112/sq ft.
These figures are based on 2026 regional construction cost data with a local cost index of 0.97x applied to the South Carolina baseline. Labor availability, local permitting costs, and material transport costs all contribute to Conway's specific pricing.
Cost by Home Size in Conway
Home Size
Cost Range
Per Sq Ft
1,000 sq ft
$98,100 — $147,150
$109 — $147
1,500 sq ft
$147,150 — $220,725
$109 — $147
2,000 sq ft
$196,200 — $294,300
$109 — $147
2,500 sq ft
$245,250 — $367,875
$109 — $147
3,000 sq ft
$294,300 — $441,450
$109 — $147
Cost by Finish Level in Conway
Finish Level
Per Sq Ft
2,000 sq ft Total
Basic (builder-grade)
$93
$185,300
Standard (mid-range)
$109
$218,000
Premium (high-end)
$147
$294,300
Get Your Exact Breakdown
14-category cost report — adjusted for Conway
Enter your zip code and project details. Results in 3 minutes.
What Drives Construction Costs in Conway?
Conway's construction market in 2026 reflects a combination of local labor rates, material availability, and permitting environment. With a cost index of 0.97x relative to the South Carolina state average, Conway sits below most South markets.
Labor Costs
Skilled trades in Conway average competitive rates vs state average. Plan for subcontractor scheduling 6-10 weeks out.
Permits & Fees
Conway building permits typically cost $1,500-$4,500 depending on scope. Budget this before breaking ground.
Material Costs
Competitive material pricing in Conway. Budget a 10% contingency for lumber fluctuations.
Land & Site Work
Conway lot prices vary widely by neighborhood. Site prep and utility hookups typically add $15,000-$45,000 on top of construction costs.
Timeline
A typical new home in Conway takes 9-14 months from permit to move-in. Permitting alone can take 6-12 weeks.
Contractor Availability
Contractor availability in Conway is generally good vs larger metros.
Free Calculators for Conway Homeowners
Frequently Asked Questions — Building in Conway
How much does it cost to build a house in Conway, South Carolina in 2026?
The average cost to build a house in Conway in 2026 is approximately $211,460 for a standard 2,000 sq ft home at $109/sq ft. Costs range from $179,741 on the low end to $264,325 for premium finishes.
Is it cheaper to build or buy a house in Conway?
Buying an existing home in Conway is often cheaper upfront than building new. However, new construction offers full customization, modern energy efficiency, and no hidden repair costs. Building makes the most sense when inventory is limited or you already own a lot.
How long does it take to build a house in Conway?
New home construction in Conway typically takes 9-14 months from breaking ground to move-in. Permitting takes 6-12 weeks, foundation and framing 2-3 months, mechanical rough-ins 1-2 months, and finishes 2-3 months.
What is the cheapest way to build a house in Conway?
To minimize costs in Conway: choose a simple rectangular floor plan, select builder-grade finishes, use a slab foundation where the lot allows, and get at least 3 bids from local general contractors. A basic 1,200 sq ft home can be built for as little as $107,256.
Do I need a permit to build in Conway, South Carolina?
Yes. All new residential construction in Conway requires a building permit from the local municipality. Budget $1,500-$4,500 for permit fees and plan for a 6-12 week review period before breaking ground.
Other Cities in South Carolina
Compare construction costs across South Carolina: