Avg Total Cost
$254k
2026 estimate
Cost Per Sq Ft
$121
Standard finish
Cost Range
$216k–$317k
low to high
City Index
1.08x
vs state avg
Free Instant Estimate
Get your exact Irving construction cost — 14 categories, state-adjusted
Enter your zip code and project size. Results in 3 minutes.
How Much Does It Cost to Build a House in Irving in 2026?
Building a home in Irving, Texas in 2026 typically costs between $215,730 and $317,250, with most projects landing around $253,800 for a standard 2,000 square foot home. At $121 per square foot, Irving is above the Texas state average of $112/sq ft.
These figures are based on 2026 RSMeans construction data with a local cost index of 1.08x applied to the Texas baseline. Labor availability, local permitting costs, and material transport costs all contribute to Irving's specific pricing.
Cost by Home Size in Irving
Home Size
Cost Range
Per Sq Ft
1,000 sq ft
$108,900 — $163,350
$121 — $163
1,500 sq ft
$163,350 — $245,025
$121 — $163
2,000 sq ft
$217,800 — $326,700
$121 — $163
2,500 sq ft
$272,250 — $408,375
$121 — $163
3,000 sq ft
$326,700 — $490,050
$121 — $163
Cost by Finish Level in Irving
Finish Level
Per Sq Ft
2,000 sq ft Total
Basic (builder-grade)
$103
$205,700
Standard (mid-range)
$121
$242,000
Premium (high-end)
$163
$326,700
What Drives Construction Costs in Irving?
Irving's construction market in 2026 reflects a combination of local labor rates, material availability, and permitting environment. With a cost index of 1.08x relative to the Texas state average, Irving sits above most South markets.
Labor Costs
Skilled trades in Irving average higher rates vs state average. Plan for subcontractor scheduling 6–10 weeks out.
Permits & Fees
Irving building permits typically cost $1,500–$4,500 depending on scope. Factor this into your early budget.
Material Costs
Higher transportation costs contribute to elevated material pricing in Irving. Budget a 10% contingency for lumber fluctuations.
Land & Site Work
Irving lot prices vary widely by neighborhood. Site prep and utility hookups typically add $15,000–$45,000 on top of construction costs.
Timeline
A typical new home in Irving takes 9–14 months from permit to move-in. Permitting alone can take 6–12 weeks.
Contractor Availability
High demand in Irving means booking quality GCs 3–6 months ahead is recommended.
Free Calculators for Irving Homeowners
Frequently Asked Questions — Building in Irving
How much does it cost to build a house in Irving, Texas in 2026?
The average cost to build a house in Irving in 2026 is approximately $253,800 for a standard 2,000 sq ft home at $121/sq ft. Costs range from $215,730 on the low end to $317,250 for premium finishes. Irving is more expensive than the Texas state average of $112/sq ft.
Is it cheaper to build or buy a house in Irving?
In Irving current market, buying an existing home is often cheaper upfront than building new. However, new construction gives you full customization, modern energy efficiency, and no hidden repair costs. Building makes sense when existing inventory is limited, you need specific features, or you own a lot already.
How long does it take to build a house in Irving?
New home construction in Irving typically takes 9–14 months from breaking ground to move-in. Permitting takes 6–12 weeks, foundation and framing 2–3 months, mechanical rough-ins 1–2 months, and finishes 2–3 months. Custom or complex builds can take 16–24 months.
What is the cheapest way to build a house in Irving?
To minimize construction costs in Irving: choose a simple rectangular floor plan, select builder-grade finishes, avoid a basement if the lot allows a slab, and get at least 3 bids from local general contractors. A basic 1,200 sq ft home in Irving can be built for as little as $119,064.
Do I need a permit to build in Irving, Texas?
Yes. All new residential construction in Irving requires a building permit from the local municipality. Your general contractor typically handles applications, but budget $1,500–$4,500 for permits and plan for a 6–12 week review period before breaking ground.
14-Category Cost Breakdown
Get your full Irving construction cost report — $19.99
Labor vs materials, state-adjusted, instant PDF · Same quality as a $400 contractor estimate
Need a floor plan?
Browse house plans designed for Texas builds
Architect-designed, instant download — modernvillaplans.com
Other Cities in Texas
Compare construction costs across Texas: